Multipro Jr.

$32,900

Used

Randy Shoup

Member since May 2024

Message the seller

Join free to send a message

Already a member? Log in

Buy safely: see it run in person or on a live video call, check the serial plate, and pay only after you've verified the seller and the title. Never use an "escrow" service the seller picks.

Safety tips · Inspection checklist

Details

Condition
Used
Listed
Sep 3, 2024
Updated
Sep 3, 2024

Description

Like New, kept indoors with low lineal footage ran
1- 1 1/2” mechanical seam
1- bead roller
1- overhead rack with 2 decoilers
2 run out tables
1- length control limit switch
1- Forward Pulling, Easy Cut Shear
1- 1 1/2 hp 110 v 60hz Electric motor
1- 100-Foot, 10 Gauge, 20 Amp Extension Cord
Year- 2010

Weight 2200lbs
Dimensions 12ft.-6in. (l) x 3ft.-10in. (w) x 4ft.-3in. (h)
Speed 30ft./minute
Drive Electric w/ 8 polyurethane rollers
Accepted Coil Widths 15 – 20in
Finished Panel Widths 10 – 16in
Coil width 15” to 20”
Panel width 10” to 16”
Capacity 28ga to 24ga
Aluminum capacity .027 to .040
Copper capacity 16 or 20 oz. 1/2 or 3/4 hard
Tooling Quick change with 12 available profiles

Specifications

PowerElectric
MachineNew Tech Machinery SSR MultiPro Jr. roof panel machine
Year2010 (per seller)
Tooling on this machine1-1/2 in mechanical seam, bead roller (per seller)
Includedoverhead rack with 2 decoilers, 2 run-out tables, length control limit switch, 100 ft extension cord (per seller)
Motor1-1/2 HP electric, 110 V, 60 Hz
Shearforward-pulling manual shear
Speedabout 30 ft/min
Coil width15 in to 20 in
Steel capacity26 ga to 24 ga
Aluminum capacity.027 in to .040 in
Copper capacity16 oz to 20 oz
Machine dimensions12 ft 6 in L x 3 ft 10 in W x 4 ft 3 in H with overhead rack
Machine weight2,200 lbs
Please notePublished figures for this model, not measured on this machine. Confirm details with the seller.
Report

Similar machines

All Roll Formers →