Used Slitters & Slitter Lines for Sale

Slitters cut wide master coil into narrower strips, so a shop can buy coil in standard widths and slit it for trim, flashing, gutter or panel widths as needed. They range from simple manual coil slitters that mount on a coil rack to full slitter lines with an uncoiler, slitting head, scrap winders and a recoiler. Roofing supply houses, trim shops and panel manufacturers are the typical buyers.

What to check when buying used

  • Width and thickness capacity: confirm maximum coil width, gauge range and coil weight.
  • Knives and spacers: check knife edges for chips and ask what knife and spacer sets are included.
  • Arbors and bearings: look for runout, play or noise.
  • Edge quality: slit a test strip and check for burrs, camber and width accuracy.
  • Recoiling and tension: on full lines, check that the recoiler winds tight, even coils.
  • Controls and safety guards.

Pair your search with decoilers & uncoilers and cut-to-length lines. The guide to moving and shipping heavy equipment applies to slitter lines too, and Financing Used Roofing Equipment covers paying for larger purchases.

Questions about Slitters & Slitter Lines

Is a coil slitter worth it for a small trim shop?

It can be, if you regularly need widths that cost more to buy pre-slit or are hard to get locally. Compare what you pay for slit coil against master coil prices, your volume, and the time to set up the slitter. A simple manual slitter is often the first step before a full line.

What should I check on slitter knives?

Inspect the edges for chips and wear, and ask how many knife and spacer sets come with the machine. Slit a test strip and look for burrs, rolled edges or width variation. Ask whether knives can be reground, who does it locally, and what replacement knives cost for that machine.

How do I move and install a used slitter line?

Full lines are heavy, have several sections, and usually need riggers, a crane or forklift, and careful leveling and alignment once installed. Ask the seller for weights, footprint drawings and power requirements, and photograph wiring before it is disconnected. Plan the move before you agree a price.