StanGroup K-Style IronMan Gutter KWM Machines 5”, 6”, 5-6 Combo
K-Style IronMan Gutter KWM Machines 5”, 6”, 5-6 Combo
New UM-4428 Listed October 11, 2024
- New
- Electric
Call for price
Ask the seller for current pricing.
Specifications
| Brand | StanGroup |
|---|---|
| Model | N/A |
| Equipment type | Gutter Machines |
| Condition | New |
| Power | Electric |
| Shipping | Freight or local pickup |
| Inspection | Ask the seller |
| Stock number | UM-4428 |
Description
K-Style Gutter Machine is very productive and easy to use. This model uses a passive drive system made of polyurethane and forming rollers made of stainless steel. The drive system provides convenient handling of the roll, so there is no need to load it before transport. This significantly reduces production waste and also eliminates slippage due to cold and condensation. Passive forming rollers allow the machine to form all recommended materials with little or no adjustment. All our machines are manufactured with high quality and have a guarantee from the manufacturer.
Models of k-style gutter machines for sale:K-Style IronMan Gutter KWM Machines 5”, 6”, 5-6 Combo.Depending on the parameters, the price may differ, so check with our managers for the cost.
Specifications
Power: 3/4 HP, 110 volt, single phase, 13.6 ampere, totally enclosed fan cooled (T.E.F.C.) motor
Dimensions: Length – 98 1/2″ (250.2 cm), Height – 48″ (122.0 cm), Width – 24″ (61.0 cm)
Weight: Approximately 1,100 lbs. (499.0 kg)
Drive: Powered polyurethane drive rollers via chains and sprockets
Shear: Front pull guillotine
Speed: Approximately 35 feet per minute
Controls: Push button entry and exit end controls with “jog” feature
Recommended Materials
- Copper – 16 oz.-20 oz. 3/4 hard maximum gauge Aluminum – .032 Maximum Gauge
- Ternecoat steel – 24 Maximum Gauge
- Aluminized steel – 24 Maximum Gauge
- Galvalume – 24 Maximum Gauge
- Painted steel – 24 Maximum Gauge
What to check on a used gutter machine
- Run 20 feet of coil in each profile and check for twist, bow, scratches and a square back.
- Inspect the forming rollers for chrome wear, rust pitting and bearing play.
- Check the polyurethane drive rollers and drive chains for wear and slack.
- Test the shear in every profile; blades should cut clean with no burr or crush.
- Confirm the motor, switches and length counter work, and note the amperage for your generator.
- List what comes with it: spools, reel stands, run-out stands, cradles and extra shears.
Similar machines in stock
Have a machine like this to sell?
List it free. Buyers contact you directly and we never take a commission.