StanGroup Manual goffering elbow machine
Manual goffering elbow machine
New UM-4429 Listed October 11, 2024
- New
- Manual
Call for price
Ask the seller for current pricing.
Specifications
| Brand | StanGroup |
|---|---|
| Model | N/A |
| Equipment type | Downspout Machines |
| Condition | New |
| Power | Manual |
| Shipping | Freight or local pickup |
| Inspection | Ask the seller |
| Stock number | UM-4429 |
Description
MEL – Manual goffering downspout machine designed to produce square and round elbows from the seamless or welded ducts.
Standard machine size range (standard set of dies): rectangle 2×3 3×4, round 2 in. 3 in.
Materials: machine operates with pipes made of aluminum .019”
Final product widely used in downspout and HVAC systems.
Productive capacity depends on size of the pipe and varies in range of 2 to 6 pc per minute.
Standard machine size range (standard set of dies): rectangle 2×3 3×4, round 2 in. 3 in.
Materials: machine operates with pipes made of aluminum .019”
Final product widely used in downspout and HVAC systems.
Productive capacity depends on size of the pipe and varies in range of 2 to 6 pc per minute.
Advantages:
- Easy operation and maintenance
- High quality of the final products
- Reasonable price
- Fast delivery
- Assembled in USA
Tech parameters: MEL
Crimper: rack and gear with lever
Advance: chain drive with lever
Size: 18 x 18 x 16 in. high
Weight: 120 lbs.
Speed: approx. 10 seconds
Construction: aluminum frame
Manual lever operation
Needs dies below
Dies available
Rectangle: 2×3 3×4
Round: 2 in. 3 in.
What to check on a used downspout machine
- Run a test length and check the lock seam closes fully without a visible gap.
- Inspect the forming rollers and drive rollers for wear, scratches and slip.
- Test the cut-off for a square, burr-free end and confirm the coil width it takes.
Similar machines in stock
New
New
Have a machine like this to sell?
List it free. Buyers contact you directly and we never take a commission.