Used Crimpers & Curvers for Sale

Crimpers and curvers bend roof and wall panels into a radius for curved roofs, barrel vaults, canopies and architectural details. Crimp curvers form small crimps across the panel to make the curve, while smooth curvers bend some profiles without crimping. Panel manufacturers and roofers who take on architectural or curved work buy them, and they are usually matched to a specific panel profile.

What to check when buying used

  • Profile match: confirm exactly which panel profile and width the curver handles.
  • Radius range: ask for the smallest and largest radius it can form and see samples.
  • Crimp quality: crimps should be even, without cracked paint or split metal.
  • Drive and controls: run it and check for steady feed and repeatable radius.
  • Mounting: check whether it attaches to a roll former or runs standalone.
  • Serial plate and manuals.

Curvers are usually bought alongside exposed fastener panel roll formers or standing seam roll formers. Read New vs Used Roofing Machines to weigh up a used purchase, and How to Buy a Used Roll Former for inspection basics.

3 machines

Questions about Crimpers & Curvers

Will a used curver work with my panel profile?

Only if it was built or tooled for that profile. Ask the seller exactly which profile and panel width it has been running, and compare it to your panels. Request sample curved panels or a video. If you are unsure, check with the manufacturer whether tooling for your profile exists.

Does crimp curving damage painted panels?

It should not if the machine is set up correctly and the paint system is suited to forming. Worn or misaligned tooling can crack paint or mark the panel. Inspect sample panels closely, especially at the crimps, and test with your own material before you commit to buying.

Is there enough curved roofing work to justify a curver?

That depends on your market. Curved roofs and canopies are a niche, so many contractors buy curved panels from a supplier instead. If you see regular curved work or want to offer it as a specialty, a used curver can make sense. Ask members in the community board how often they use theirs.